Pneumatic cleaning of the pellet burner

Home Pneumatic cleaning of the pellet burner

Pneumatic cleaning of the pellet burner

It is a device designed for cleaning the combustion chamber of the burner when burning lower quality wood pellets, which form lumps. That is, the combustion of wood pellets with a higher content of bark and impurities. The device does not solve and is not intended for burning plant pellets and grain.

The device, in conjunction with the pellet burner, ensures the automatic removal of lumps and ash from the combustion chamber of the burner at regular intervals or always after the burner has burned out.

Pneumatic burner cleaning is very fast, efficient and reliable. If the customer requires to ensure that the cleaning does not take place at night, the set can be supplemented with a special timer (not normally available in the store – inductive load 8 A).

The device is sold as a set for conversion of a burner to ATMOS A25 or A45 pellets.

The basic version of the ATMOS A85 burner is always supplied with pneumatic cleaning.

Basic sets
Accessories

1. Set for pellet boilers

– designed for D10PX, D15PX, D20PX, D25PX (pellet burner ATMOS A25)

Kit composition:

connecting air hose 1.5 m long (diameter 28 mm) with the required fitting (3/4 “) and control solenoid valve
new ignition coil plate (holder)
new combustion chamber
pneumatic cleaning duct with lock nut and washer

Set	Description	Code
Set CPX25KS for ATMOS A25 pellet burner	extended set with a compressor with a power input of 1500 W and an air correction jet volume of 6 l	H0538
Sada CPX25S for ATMOS A25 pellet burner	basic set without compressor	H0539

2. Set for pellet boilers with exhaust fan

– designed for D20P (pellet burner ATMOS A25)
– designed for DCxxSP(X), CxxSP – old design to serial number 343500 (pellet burner ATMOS A25)

– designed for D31P, D30P, D50P (pellet burner ATMOS A45)

Kit composition:

connecting air hose 1 m long (diameter 28 mm) with the necessary fitting (3/4 “) and control solenoid valve
new ignition coil plate (holder)
new combustion chamber
pneumatic cleaning duct with lock nut and washer
AD04 module for special boiler fan functions
AD03 module for controlling the boiler fan and compressor via the backup output R, R2

Set	Description	Code
Set CP25KS for ATMOS A25 pellet burner	extended set with a compressor with a power input of 1500 W and an air correction jet volume of 6 l	H0524
Set CP25S for ATMOS A25 pellet burner	basic set without compressor	H0525
Set CP45KS for ATMOS A45 pellet burner	extended set with a compressor with a power input of 1500 W and an air correction jet volume of 6 l	H0522
Set CP45S for ATMOS A45 pellet burner	basic set without compressor	H0523

3. Set for pellet boilers with exhaust fan

– designed for DC18SP, DC25SP, DC30SPX, DC32SP, C18SP, C25SP (DCxxGSP) – from serial number 343500
(boiler and pellet burner ATMOS A25 with actuator)

Kit composition:

connecting air hose 1 m long (diameter 28 mm) with the necessary fitting (3/4 “) and control solenoid valve
new ignition coil plate (holder)
new combustion chamber
pneumatic cleaning duct with lock nut and washer
AD02 module (built into the boiler) for controlling the boiler exhaust fan from the AD04 module via the electronics terminal of the VV burner (15) and the compressor

Set	Description	Code
Set CP25KGSP for ATMOS A25 pellet burner	extended set with a compressor with a power input of 1500 W and an air correction jet volume of 6 l	H0544
Set CP25GSP for ATMOS A25 pellet burner	basic set without compressor	H0545

4. Set for pellet boilers without exhaust fan

– designed for D14P, D21P, D25P, D15P (pellet burner ATMOS A25)

Kit composition:

connecting air hose 1 m long (diameter 28 mm) with the necessary fitting (3/4 “) and control solenoid valve
new ignition coil plate (holder)
new combustion chamber
pneumatic cleaning duct with lock nut and washer
AD02 module for compressor control via backup output R, R2

Set	Description	Code
Set CP25K for ATMOS A25 pellet burner	extended set with a compressor with a power input of 1500 W and an air correction jet volume of 6 l	H0520
Set CP25 for ATMOS A25 pellet burner	basic set without compressor	H0521

5. Set for gasification boilers for wood, wood briquettes and coal and wood with a built-in burner in the upper door – boilers with adjustment for the burner

– designed for DCxxS, DCxxRS, CxxS(T), ACxxS with ATMOS A25 pellet burner
– designed for DC50S (with ATMOS A45 pellet burner)

Kit composition:

connecting air hose 1.5 m long (diameter 28 mm) with the required fitting (3/4 “) and control solenoid valve
new ignition coil plate (holder)
new combustion chamber
pneumatic cleaning duct with lock nut and washer
AD04 module for special boiler fan functions
AD03 module for controlling the boiler fan and compressor via the backup output R, R2
special metal cover under the flap

Set	Description	Code
Set UCP25KS for ATMOS A25 pellet burner	extended set with a compressor with a power input of 1500 W and an air correction jet volume of 6 l	H0526
Set UCP25S for ATMOS A25 pellet burner	basic set without compressor	H0527
Set UCP25KS for ATMOS A45 pellet burner	extended set with a compressor with a power input of 1500 W and an air correction jet volume of 6 l	H0528
Set UCP25S for ATMOS A45 pellet burner	basic set without compressor	H0529

We choose the basic set without a compressor only if we have a compressor with an air correction jet volume of 5 to 10 l, which is able to reach a pressure of 5 – 8 bar (600 – 800 kPa). The compressor or air correction jet volume must be in the immediate vicinity of the boiler and the basic pipe diameters must be observed.

Accessories

Sada	Kód
A set for drilling a hole in an older pellet burner type is designed for burners that are not factory equipped with a hole for built-in pneumatic cleaning. The set consists of a graduated drill for drilling a hole Ø 27 ± 1 mm and a jig for pre-drilling the basic hole in the pellet burner body.	S0623
The device itself for pre-drilling a hole in the pellet burner body	S0610
Special timer with inductive load 8 A	S0090