Automatic ash removal

As an accessory for every pellet boiler DxxP, which was made after 1.3.2007 you can equip the boiler with automatic ash removal from the boiler body to an additional ash pan. This automatic Ash removing equipment does not require any special attendance and increase comfort during pellet heating.

The boiler is cleaned automasticaly by the auger conveyor with gearbox. It cleans the ash space in the boiler in regular intervals in 1 hour, in 3 hours, in 6 hours, in 12 hours or in 24 hours depending on type of used fuel. It is possible to switch the automatic cleaning manually by pressing the main switch on the boiler. Carefully choose the capacity of the ash pan based on ash content and the used fuel.

When the additional ash pan is completely full, the ash removal device (worm) will be automatically switched off and the deashing module will start to emit a sound signal. You can restart the device after cleaning (emptying) of the additional ash pan by merely turning off and on the switch on the boiler for 5 to 10 seconds.

Ash removal device

- without additional ash pan (box)

Type code

For boilers D14P, D21P S0577

For boilers D25P, D31P S0578

For boilers D15P, D20P S0535

For boilers D30P, D40P S0536

For boiler D50P S0537

For boiler D80P S1080

Additional ash pans (boxes)

for boilers D14P, D21P, D25P, D31P, D15P, D20P, D30P, D40P, D50P
(red)

Type code

Small - volume 28 l S0542
Recommended capacity for boilers D14P, D21P, D25P, D15P,D20P when heating with good quality pellets. Cleaning interval 14 - 30 days.

Middle - volume 68 l S0544
Recommended capacity for boilers D14P, D21P, D25P, D15P,D20P, D30P, D31P, D40P, D50P when heating with good quality pellets. Cleaning interval 14 - 30 days.

Big - volume 135 l S0546
Recommended capacity for boiler D50P when heating with alternative biomass pellets. Cleaning interval 14 - 45 days.

for boiler D80P

Type code

Middle - volume 68 l S1068
Intended only for boiler D80P - for screw diameter of 80 mm.

Big- volume 135 l S1069
Intended only for boiler D80P - for screw diameter of 80 mm.

Dimensions of Additional ash pans

Deashing module AD01

The module is located under the hood of the boiler and allows you to adjust the length and frequency of ash removal.


Older type module AD01 and his settings


New type module AD01 and his settings

Gallery

Galerie 10Galerie 10