The pneumatic cleaning of the burner

This is a device intended for cleaning of the turner combustion chamber during combustion of the low-quality wood pellets, which create cakes. This is actually the burning of wood pellets with a higher content of bark and dirt. The device itself does not offer a solution and is not intendedfor the burning of herbal pellets and grain.

In conjunction with the pellet burner, the device provides automatic removal of cakes and ash from the burner combustion chamber at regular intervals or after every burning out of the torch.

The pneumatic cleaning of the burner is very fast, efficient and reliable.

The equipment is sold as a kit for the rebuilding of the pellet burner ATMOS A25 or A45.

Basic sets

1. Kit for pellet boilers without exhaust fan

- designed for D14P, D21P, D25P, D15P

Composition of the kit:

  • connecting air hose with a length of 1 m (diameter 28 mm) with necessary fittings (3/4“) and control electro valve
  • a new plate (of the bracket) for ignition spirals
  • new combustion chamber
  • pneumatic cleaning duct with locking nut and washe
  • AD02 module to control the compressor via the auxiliary outputs R, R2
CodeSetDescription
H0520 Set CP25K for burner A25 the kit supplemented with a compressor - power input: 1.500 W, air reservoir capacity: 6 l
H0521 Set CP25 for burner A25 basic kit without compressor


2. Kit for pellet boilers with exhaust fan

- designed for D20P, DCxxSP (burner A25), D31P, D30P, D45P (burner A45)

Composition of the kit:

  • connecting air hose with a length of 1 m (diameter 28 mm) with necessary fittings (3/4“) and control electro valve
  • a new plate (of the bracket) for ignition spirals
  • new combustion chamber
  • pneumatic cleaning duct with locking nut and washe
  • AD04 module for special functions of the boiler fan
  • AD03 module to control the boiler fan and compressor via the auxiliary outputs R, R2
CodeSetDescription
H0524 Set CP25KS for burner A25 rthe kit supplemented with a compressor - power input: 1.500 W, air reservoir capacity: 6 l
H0525 Set CP25S for burner A25 basic kit without compressor
H0522 Set CP45KS for burner A45 the kit supplemented with a compressor - power input: 1.500 W, air reservoir capacity: 6 l
H0523 Set CP45S for burner A45 basic kit without compressor


3. Kit for gasification wood boilers, wood briquettes, wood and coal with a built-in burner in the upper door

- designed for DCxxS, DCxxRS, CxxS, ACxxS

Composition of the kit:

  • connecting air hose with a length of 1 m (diameter 28 mm) with necessary fittings (3/4“) and control electro valve
  • a new plate (of the bracket) for ignition spirals
  • new combustion chamber
  • pneumatic cleaning duct with locking nut and washe
  • AD04 module for special functions of the boiler fan
  • AD03 module to control the boiler fan and compressor via the auxiliary outputs R, R2
  • a special metal cover under flap
CodeSetDescription
H0526 Set UCP25KS for burner A25 the kit supplemented with a compressor - power input: 1.500 W, air reservoir capacity: 6 l
H0527 Set UCP25S for burner A25 basic kit without compressor

INFO - The basic set without compressor should be chosen only if you have a compressor of receiver volume from 5 to 10 l which can reach a pressure of 5 - 8 bar (500 - 800 kPa). The compressor or receiver must be right next to the boiler and the basic pipe diameters with which the air is pumped into the chamber must be kept.


Rozložená sada s upraveným kompresorem
Opened set with modified compressor
Rozložená sada bez kompresoru
Opened set without compressor



CodeSet
S0623 Kit to drill a hole into the older body of the burner
it is designed for burners which are factory supplied with a hole for installation of the pneumatic cleaning.
The kit consists of a graduated drill bit to drill a hole Ø 27 ±1 mm and a tool to pre-drill a basic hole in the burner body.
S0610 The separate tool to pre-drill a hole in the burner body
S0090 Special timer with the inductive load of 8 A