Textile silos

Large textile silos are designed for convenient storage of pellets for the heating season. Silos can be placed directly into the boiler room or in adjoining areas. Another option is to place them in an enclosed outdoor shelter so as not to be exposed to sunlight and weather conditions (e.g. rain, wind).

The ATZ silos are designed for pneumatic refuelling of pellets from the cistern truck. For this purpose they are equipped with two ganges STORZ A110, which can be placed to any two sides. The textile silo is also equipped with two holes, through which it is possible to fill the silo manually from bags or a big bag to a certain height of the silo.

Part of the delivery is also a universal container located at the botám of the silo, which is equipped with a pneumatic probe for the pneumatic transport of pellets or a flange allowing scooping of pellets directly by the screw conveyor (DAxxxx and DRA50 type) to the burner A25 or A45. In these cases it is recommended to use the length of the conveyor at least 2.5, 3, 4, and 5 m.

The silo is designed as a steel structure ensuring easy assembly, into which the textile bag is suspended. This is made of a solid material with a special inner treatment to reduce the moisture penetrating in the pellets stored. No structural modifications are required before installing the silo, the silos need only the reinforced, optimally the concrete floor.

The silos are manufactured in three basic sizes for maximum usable volume of 5.5, 6.5 and 7.9 m3. The silo type or frequency of refilling in the heating season is easy to be set according to the basic rule: 1 kW of the needed output of the heat source = 0.5 m3 (325 kg) of pellets / year.

 
Zapojení kotle a textilního sila s přímým dopravníkem

Silo

Zapojení kotle a sila s pneumatickým dopravníkem pelet

Silo

 
Zapojení kotle a textilního sila s přímým dopravníkem

Boiler and textile silo with a direct conveyor

Zapojení kotle a sila s pneumatickým dopravníkem pelet

Boiler and a silo with a pneumatic pellet feeding

 

Textile silos - technical information

with accessories (universal container (H0510), 2x STORZ A110, anchorage, etc.)

set code usable volume (m3) dimensions of sides (mm) height (mm)
ATZ 5 H0505 3,9 - 4,6 1960 x 1960 2 320
ATZ 6 H0506 4,8 - 5,6 1960 x 2360 2 320
ATZ 7 H0507 5,8 - 6,8 2360 x 2360 2 320

Universal container for textile silo ATZ


Universal container for textile silo ATZ
it is equipped with a pneumatic suction probe and replaceable adapter allowing direct scooping of pellets by the auger conveyor from the textile silo. It includes a locking mechanism and cleaning hole.

CAUTION: the universal container is supplied with each textile tank ATZ.