Pellet conveyors

Auger conveyors for pellets are designed for burners on pellets ATMOS.

For the pellet burner ATMOS A25 are external shaftless conveyors DA in lenghts from 1,5 m to 4 m.

For the pellet burner ATMOS A45 and ATMOS A85 are external shaftless conveyors DRA in lenghts from 1,7 m to 5 m.

Conveyors are equipped with a motor with gearbox.

Every conveyor is delivered with a support leg.The length of the leg should be set that the angle of the conveyor should be maximum 45° and the hose is tightened.

The conveyors for pellet burner ATMOS A25

DA1500, DA2000, DA2500, DA3000, DA4000

Auger pellet conveyor DA1500 with lenght 1,5 m, Ø 75 mm (gearbox 25 W) code: H0151
This conveyor is specified only for boilers where the burner is on the sides - D14P, D21P, D25P, D15P, D20P, DCxxSP. This conveyor is not intended for boilers with modification for pellet burner.

Auger pellet conveyor DA2000 with lenght 2 m, Ø 75 mm (gearbox 25 W) code: H0207
This conveyor is specified for gasification boilers with burner in upper doors. - DCxxS(X), DCxxRS, DCxxSP, CxxS, ACxxS. You can use them allso for standart pellet boilers DxxP.

Auger pellet conveyor DA2500 with lenght 2,5 m, Ø 75 mm (gearbox 25 W) code: H0208

Auger pellet conveyor DA3000 with lenght 3 m, Ø 75 mm (gearbox 40 W) code: H0209

Auger pellet conveyor DA4000 with lenght 4 m, Ø 75 mm (gearbox 40W) code: H0212
This conveyor is specifed for all pellet boilers ATMOS, when the pellet silo is in bigger distance from the boiler.

The length of the conveyor must be chosen that the hose between the turner and conveyor is tightened and have lenght at least 20 cm (ideally 30 - 60 cm) for safety reasons. The maximum length of the hose should not exceed 1 m.

- with leg conveyor - Every conveyor is delivered with a support leg.The length of the leg should be set that the angle of the conveyor should be maximum 45° and the hose is tightened.

- hanging from the ceiling - In a limited space the support leg is recommended to be replaced by a chain, on which the conveyor is suspended from the ceiling. The length of the leg should be set that the angle of the conveyor should be maximum 45° and the hose is tightened.

CAUTION: The conveyor is available separately, but is an integral part of the pellet burner A25

The conveyors for pellet burner ATMOS A45 / A85

DRA50 - 1,7 m, DRA50 - 2,5 m, DRA50 - 4 m, DRA50 - 5 m

Auger pellet conveyor with shaft DRA 50 code: H0039
lenght 1,7 m and diameter 80 mm (gearbox 40 W)

Auger pellet conveyor with shaft DRA 50 code: H0037
lenght 2,5 m and diameter 80 mm (gearbox 40 W)

Auger pellet conveyor with shaft DRA 50 code: H0004
lenght 4 m and diameter 80 mm (gearbox 40 W)

Auger pellet conveyor with shaft DRA 50 code: H0005
lenght 5 m and diameter 80 mm (gearbox 40 W)

The length of the conveyor must be chosen that the hose between the turner and conveyor is tightened and have lenght at least 20 cm (ideally 30 - 60 cm) for safety reasons. The maximum length of the hose should not exceed 1 m.

- with leg conveyor - Every conveyor is delivered with a support leg.The length of the leg should be set that the angle of the conveyor should be maximum 45° and the hose is tightened.

- hanging from the ceiling - In a limited space the support leg is recommended to be replaced by a chain, on which the conveyor is suspended from the ceiling. The length of the leg should be set that the angle of the conveyor should be maximum 45° and the hose is tightened.

CAUTION: The conveyor is available separately, but is an integral part of the pellet burner A45/A85



Technical information

Conveyor

Code:

Burner

A

B

C

D

E

Gearbox

DA1500 H0151 A25 1500 75 330 130 65 25 W
DA2000 H0297 A25 2000 75 330 130 65 25 W
DA2500 H0208 A25 2500 75 330 130 65 25 W
DA3000 H0209 A25 3000 75 330 130 65 40W
DA4000 H0212 A25 4000 75 330 130 65 40W
-------- ------- --------- ----- --- --- --- --- ----------
DRA50 H0039 A45 / A85 1700 80 370 170 75 40 W
DRA50 H0037 A45 / A85 2500 80 370 170 75 40 W
DRA50 H0004 A45 / A85 4000 80 370 170 75 40 W
DRA50 H0005 A45 / A85 5000 80 370 170 75 40 W